生物药层析柱超级上样杯-Bigloop
产品特性
适用于大体积或反复多次上样
内部动态密封结构确保样品不受污染
可与1/16接头和1/8接头连接
最大操作压力10bar
三种规格可选：
10ml（Bigloop10）、 50ml（Bigloop50）、 150ml（Bigloop150）
技术规格
Operating Method
Connect the Bigloop to the injection valve, first fill it with buffer liquid Then use the injection syringe to put the sample in the Bigloop from the bottom by hand or sample pump.(as show in picture 1.) Push the piston down through infusing buffer solution, , then infuse the sample into the column .The piston is sealed ,which can stop the mixture of buffer and sample.(as show in picture 2.)When the piston move to the bottom place, the buffer liquid will enter into the system through by-pass channel.(as show in picture 3.)
初始缓冲液的装入方法
首先将上端的内端块和外盖拆卸下来，把活塞移动到底部，之后把缓冲液缓缓的倒入玻璃管内。接着把内端块和外盖装上，尽量使里面没有气泡（如图4）。
